7 Pack Nanofiber SETA® Filter
Regular price $20.00DIMENSIONS
12cm W x 9cm H
SPECIFICATIONS
- Tri-layered Nanofiber SETA® Filter for optimum performance (6 layers in total when used with a Nanofiber filter)
- Pack comes with 7 Nanofiber SETA® Filters
- The filters are NOT reusable
- Fabric face masks/filters do NOT protect the wearer from airborne COVID-19 particles entering the nose, mouth or eyes, they do have some very worthy benefits
- Filters might have small imperfections in size due to the nature of being hand cut
- The filters can be compromised from poor handling
COMPOSITION
Filter layer is SETA® Nanofiber filters which is 0.5gsm Nanofiber between two layers of polypropylene. This fits into our 100% Cotton pocket so you can regularly change out the filter.
SETA® NANOFIBRE FILTER TECHNOLOGY:
SETA filtration media is a revolutionary approach to air filtration. Using electrospun nanofibers infused with a antibacterial additives to trap even the smallest airborne particles.
0.5gsm Nanofibre between two layers of polypropylene
98.75% BFE (Bacterial filter efficiency)
Meets the N95-97 Standard
High efficiency PM2.5 Protection
Meets ISO9001 and AS9100 Certification Standards
Made in Auckland New Zealand
A 0.75gsm Seta Nanofibre layer retains a 99% particle filtration efficiency all the way down to 0.1μm
Mask Sizes
What size will fit me?
If you are unsure what size you are, take some measuring tape and measure from the tip of your nose to the base/tip of your chin bone. If this is between 8 - 13.5cm, we recommend an adult mask. If the distance is 8cm or less, we recommend a child mask. If you are in between sizes, you should make an assessment of your nose and face size. Rounder/larger noses and face will probably work better with a larger size mask. Smaller/thinner noses and faces will probably work better with a smaller size mask.
See mask sizes for child and adult below.
Dimensions (cm) | Width | Height (highest point) | Height (sides) |
Child | TBC | TBC | TBC |
Adult | 19.5 | 13.5 | 7.5 |
How to care for your SMASK
- Before removing mask, make sure you have washed your hands or sanitized with an alcohol-based hand sanitizer containing at least 60% alcohol
- Carefully remove your mask by grasping the ear loops or untying the ties
- Place mask in a delicates bag
- Gentle hand wash or machine wash with like colours, up to a maximum temperature of 40°C
- After washing your mask, tumble dry in a dryer on high heat setting to ensure any remaining bacteria or germs are killed. You can also line dry in the sun. Do not wring
- Iron the mask with steam iron if desired
- Do not wear mask until it is 100% dry
- Keep in a clean dry place when not wearing